意見反饋
義工

育兒好物 今日: 10|主題: 92763

查看: 1012 | 回覆: 5
Dr. Brown 奶樽漏奶問題


子爵府

國民生產總值:11651


發表於 05-2-4 10:06 |顯示全部帖子

Dr. Brown 奶樽漏奶問題

我囡囡一出世到依家都係用dr. brown都無問題,但依家開始食到7oz就開始有小小漏奶,even未過佢條limit,我想問係唔係要轉第2隻奶樽?咁轉邊隻奶樽會好d同埋佢會易適應d?


別墅

國民生產總值:656


發表於 05-2-4 14:05 |顯示全部帖子

Re: Dr. Brown 奶樽漏奶問題

漏奶係咪因為條管既膠質歪左呀, 我囝囝都係飲7OZ都冇漏, 但係試過膠質歪左就會漏架, 你睇下會唔會係咁, 唔知幫唔幫到你 :mrgreen:


子爵府

國民生產總值:11651


發表於 05-2-4 14:36 |顯示全部帖子

Re: Dr. Brown 奶樽漏奶問題

thank you, 等我留意下先。咁我想問d膠會唔會損耗,使唔使隔幾耐要換過哂d樽架?


洋房

國民生產總值:579


發表於 05-2-4 15:13 |顯示全部帖子

Re: Dr. Brown 奶樽漏奶問題

not sure about your question but I do know that if you heat up the milk by putting the bottle in a cup of hot water or if you make the formula without taking out the pipe inside, then the milk will go up the pipe and that can cause the dripping. IF the milk does get trapped in the pipe, leave the bottle to cool down for a while.

Could the problem be because you have changed to type 3 nipple ie the milk is flowing too fast for your bb to drink?


子爵府

國民生產總值:11651


發表於 05-2-4 15:52 |顯示全部帖子

Re: Dr. Brown 奶樽漏奶問題

thanks marshmellow, in fact, i did not put the bottle in a cup of hot water and have never make the formula without taking out the pipe. but i am not sure if there is milk trapped in the pipe. i better check the next time.

is nipple #3 is one of the factor? i've just changed about 2 weeks ago. i thought the reason for leaking is because the milk is over the 8oz line since 7oz formula + water will ended up about 8oz, and never happened with 6.5oz formula.


洋房

國民生產總值:579


發表於 05-2-5 21:53 |顯示全部帖子

Re: Dr. Brown 奶樽漏奶問題

if the milk is flowing too quickly for bb to drink, then it is easy for it to dribble out. You could try to change back to size 2 to see if the same thing happens. But it could also be because you have more milk in the bottle....although I do not have this problem when I make 7oz formula + water for my bb. Sorry cannot help you further ....


© Baby-Kingdom.com Limited. All rights reserved.